Offline editor for the Beads module

GrainKontrol

Your own wavetables in Beads. Open the firmware, draw or import your waveforms, then send the update to the module, straight from your browser.

v1.0.1 · 17 October 2026

Tested in Chrome, on a computer. To use it offline, open the app and save the page (Cmd+S or Ctrl+S).

GrainKontrol: the 12 banks of 16 waveforms, and the editor for the selected wave

What GrainKontrol does

How it works

  1. Load the official firmware built into the app, or open the firmware of your choice.
  2. Edit the banks you want, and listen to them.
  3. Generate the update file with your wavetables.
  4. Patch your audio interface output into IN L, power up the rack while holding FREEZE, then start playback. The module restarts on the new firmware by itself.

Tip The Beads bootloader needs a hot signal. Aim for a yellow to orange LED on the quality button: plain green caused errors in testing.

Tested on a real Beads: stock firmware reflashed, then a custom wavetable bank, checked with A/B recordings against the factory tables. To go back to the factory tables, just flash the built-in official firmware again.

GrainKontrol: the flashing steps and the module's LED guide

What you need

  • A Beads module.
  • A computer with Chrome. Other browsers haven't been tested yet.
  • An audio interface, patched into the module's IN L.
  • No need to hunt for the official beads.wav: the official firmware is built into the app, and flashing it again always lets you roll back. The update never touches the bootloader.

Everything happens on your computer: your files are never uploaded, and your library stays in your browser.

GrainKontrol is free

If you find it useful, you can support its development on Ko-fi.

GrainKontrol is not affiliated with Mutable Instruments or Émilie Gillet. The Beads name is used only to identify the module this tool works with.

The audio encoder, wavetable format, original wavetables and official firmware come from Émilie Gillet's code, published under the MIT license. The license text is in the app.

The app includes the official Beads firmware, decoded from Émilie Gillet's beads.wav (MD5 checked): the one tested on a module. Flashing a firmware is at your own risk.

Designed by dAtAkult, coded with Claude Code.